110V 220V Pivot Tower Box , Center Pivot Last Tower Control Box

Feature:

1. Intermediate tower box,end tower box,and booster tower box,guide tower box

2. Galvanized steel construction,stainless steel shaft and bearing assembly helps to assure long time

3. High quality electrical element and circuits to extend life

4. ABS tower box cover

5. AC contactor: Schneider

6. Micro switch:Omron

Specification:

1. Working temperature: -40℃~+80℃

3. Insulation resistance:≥500MΩ

4. Contactor coil Voltage:110V/220VAC

5. Current:09A,12A,25A

6. House material:metal base with galvanized & pp cover

Installation:

Install the equipment through the mounting panel of the tower box,if the mounting hole needs to be special,pls provide addtional drawings or instructions.

Advantage:

1. Galvanized steel base for long trouble-free life.
2. Rigid, non-flexing for accurate alignment
3. Will not distort or crack over time
4. Will not degrade over time due to environment
5. UL-approved plastic cover
6. Stainless steel shaft and nylon bearings for smooth operation and long life
7. Steel cam and heavy return spring for safety
8. Exclusive micro-switches.
9. Special brown material minimizes thermal effects for significantly improved alignment accuracy
10 Tested to 10 million cycles under load for long trouble-free life
11 Adjusting screw to set trip point - don't need to bend arm to adjust
12. Stainless steel internal springs for long life
13. Heavy-duty contactor
14. External emergency on / off switch to shut down pivot.
15 Each tower box is factory-set and functionally tested to ensure proper operation.

Electric controlers parts: